How to use manual height gauge

 · For measuring of toolings and fixtures or for scribing workWeb site: www.doorway.ru ②Set the Height Gauge reading to mm. This is the reference position. ③Measuring Height. Reposition the Dial Indicator Stylus to the surface to be measured, and adjust the Height Gauge so that the Dial Indicator reading is mm. ④The LCD display of the Height Gauge now shows the height relative to the reference www.doorway.ru Size: 1MB.  · Move the indicator to the surface and then zero the gauge. Press down softly on the base of the gauge, if the indicator moves, then the surface is not level. Check and re-clean both surfaces and perform the test again. If the indicator continues to move, then, you will need to consider resurfacing and recalibrating your granite www.doorway.ruted Reading Time: 4 mins.

Step1: Clean the working platform and put the digital height gauge on it. Step 2: Dry the surface of the protective sticker of the digital height gauge. Step3: Fix the measuring jaw of the digital height gauge. Step 4: Clean the measuring jaw of the height gauge. Step 5: Loosen the locking screw of the height gauge. Height gauges consist of a sliding carriage with a moving stylus or scribe that is mounted to a vertical axis beam or column that contains a measuring scale. The beam is configured so that it is perpendicular to the base of the height gauge, which is typically made using a rigid material to add stability to the instrument for measurements. ②Set the Height Gauge reading to mm. This is the reference position. ③Measuring Height. Reposition the Dial Indicator Stylus to the surface to be measured, and adjust the Height Gauge so that the Dial Indicator reading is mm. ④The LCD display of the Height Gauge now shows the height relative to the reference surface.

Vernier Height Gage. This type of height gauge is available in sizes from 6” to 6' in height. Relatively simple to operate, their main advantage over other. Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools and equipment. △ CAUTION! Some edges, in. For measuring of toolings and fixtures or for scribing workWeb site: www.doorway.ru